TM 9-4931-374-13&P
REASSEMBLY
1
TWO REINFORCING STRIPS (1).
Assemble inside modified tool
cabinet (2).
2
FOUR BLIND NUTS (3).
a. Install in four holes from outside.
b. Pull up tight using hydraulic gun.
INSTALLATION
1
MODIFIED TOOL CABINET (1). Position
at cargo door end of left table (2).
2
TWO FLAT WASHERS (3), TWO
(4),
AND
TWO
SCREWS (5). Install through angle into
back of modified tool cabinet.
3-177
