TM 9-4931-374-13&P
3-17. SHOP SET--TOOL CABINET MODIFICATION--MAINTENANCE INSTRUCTIONS (cont)
1
FOUR BLIND NUTS (1). Replace if removed.
2
TWO REINFORCING STRIPS (2).
If bent or broken, replace by
fabrication (fig. 13, app E).
3
MODIFIED TOOL CABINET (3).
a. Repair minor dents with soft-faced hammer.
b. Repaint any damaged painted surfaces.
c. Replace if not repairable. Refer to SC 4931-95-CL-A21.
MODIFICATION OF TOOL CABINET
NOTE
Perform this procedure only when a new tool cabinet is
to be modified.
TOOL CABINET (1). Drill four 0.413-in. (1.049-cm) holes (two through front
and two through back) as illustrated.
Table 3-5. Tool Cabinet
Modification Conversion Table
IN.
CM
8.750.01
22.220.03
10.500.01
26.670.03
33.200.01
84.330.03
3.000.01
7.620.03
3-176
