TM 9-4931-374-13&P
3-15. SHOP SET--DOOR MODIFICATION--MAINTENANCE INSTRUCTIONS (cont) !
MODIFICATION OF DOOR
1
PERSONNEL DOOR (1).
NOTE
a. Drill four 0.391-in. (0.993-cm) diameter
Steps 1 and 2 are used only
holes (2) 1.50 in. (3.81 cm) deep in
for initial installation or if the
interior surface located per dimensions
shelter or personnel door are
as illustrated.
replaced with new parts.
Table 3-4. Door
Modification Conversion Table
IN.
CM
IN.
CM
10.245
26.02
34.75
88.27
1.375
3.493
5.75
14.61
14.25
36.20
13.00
33.02
6.00
15.24
0.44
1.12
2
HONEYCOMB CELL WALL (4).
Cut
through if it falls between 0.391-in. (0.993-
cm) diameter hole and either 0.125-in.
(0.318-cm) diameter holes.
b. Drill two 0.125-in. (0.318-cm)
diameter holes (3) through inside
skin on each side of each 0.391-in.
(0.993-cm)
diameter
hole
as
illustrated.
3-158
