TM 9-4931-374-13&P
MODIFICATION
6
CONDUIT BOX
(12).
Repair
by
replacement.
7
SCREW (13), LOCKWASHERS (14), AND
NUTS (15). Repair by replacement.
NOTE
Steps 1 and 2 below are
8
SCREW (16) AND LOCKWASHER (17).
necessary only when the
Repair by replacement.
listed
parts
have
been
replaced with new parts or at
the time of initial installation.
1
CONDUIT BOX J20 AND J21 (1).
a. Drill one 0.31-in. (0.79-cm) hole (2) in the bottom as illustrated.
b. Drill one 0.19-in. (0.48-cm) hole (3) in the side as illustrated.
3-121
