TM 9-2330-390-14&P
APPENDIX C
REPAIR PARTS AND SPECIAL TOOLS LISTS
Section I. INTRODUCTION
C-1.
SCOPE.
This RPSTL lists and authorizes spares and repair pans; special tools; special test, measurement, and
diagnostic equipment (TMDE); and other special support equipment required for performance of Unit, Direct Support,
and General Support Maintenance of the M1022A1 Dolly Set. It authorizes the requisitioning, issue, and disposition of
spares, repair parts, and special tools as indicated by the Source, Maintenance, and Recoverability (SMR) codes.
C-2. GENERAL.
In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following
sections:
a.
Section II, Repair Pans List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes parts which must be removed for replacement of the authorized
pans. Pans lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each
group listed in ascending figure and item number sequence. Bulk materiels are listed by item name sequence at the
end of the section. Repair parts kits are listed separately in their own functional group within Section II. Repair pans for
reparable special tools are also listed in this section. Items listed are shown on the associated illustration(s)/figure(s).
b. Section III, Special Tools List. A list of special tools, special TMDE, and other special support
equipment authorized by this RPSTL [as indicated by Basis of Issue (BOI) information in the DESCRIPTION AND
USABLE ON CODE (UOC) column] for the performance of maintenance.
c.
Section IV, Cross-reference Indexes. A list, in National Item Identification Number (NIIN) sequence, of
all National stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all part
numbers appearing in the listings. National stock numbers and part numbers are cross-referenced to each
illustration/figure and item number appearance.
C-3.
EXPLANATION OF COLUMNS (SECTIONS II AND Ill).
a. ITEM NO. - Column (1). Indicates the number used to identify items called out in the illustration.
b. SMR CODE - Column (2). The Source, Maintenance, and Recoverability (SMR) code is a
five-position code containing supply/requisitioning information, maintenance category authorization criteria, and
disposition instruction, as shown in the following breakout:
Source Code
Maintenance Code
Recoverability Code
1st two positions
3rd position
4th position
5th Position
How you get an item.
Who can install, replace,
Who can do complete
Who determines disposition
or use the item.
repair* on the item.
action on an unserviceable item.
Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the “Repair”
function in a use/user environment in order to restore serviceability to a failed item.
C-1
