TM 9-2330-390-14&P
4-125. FUEL TANK MAINTENANCE (Cont).
6.
7.
Connect fuel hose (9) to joint (7) at fuel injection
pump (6) with clip (6).
Install oil cooler cover (see paragraph 4-117).
tank (2).
1.
Install copper gasket (4) and drain plug (5) on fuel
NOTE
Pivoting tray must be unlocked and level to
ensure filling to correct level.
If tank is filled too full, fuel may seep from
vented cap.
2.
Remove cap (1) and fill fuel tank (2) with diesel
fuel. Maximum fuel level height should be just vis-
ible at top of fuel indicator (3). DO NOT overfill.
3.
Install cap (1) on fuel tank (2).
Follow-on Tasks:
Connect negative (-) ground cable to battery (see
paragraph 4-45).
Start engine (see paragraph 2-20) and check for fuel
leaks.
4-373