TM 9-2330-390-14&P
4-308 Change 4
4-111. HYDRAULIC RESERVOIR AND REDUNDANT POWER FITTINGS REPLACEMENT
(Con’t).
6.
On rear dolly only, remove locknut (19), flatwasher (20), screw (32), and clamp (30) with hose bundle (31)
from angle bracket (21). Discard locknut.
7.
Remove six locknuts (28), 12 flatwashers (29), capscrews (18), angle bracket (21) (rear dolly only), two
mounting plates (22), and hydraulic reservoir (3) with fittings from pivoting tray (24). Discard locknuts.
8.
Remove cap (17) from hydraulic reservoir (3).
9.
Remove straight connector (5) and preformed packing (23) from hydraulic reservoir (3). Discard preformed
packing.
10.
Remove quick disconnect coupler (15), preformed packing (25), union (26), and preformed packing (27)
from hydraulic reservoir (3). Remove dust cap (16) from quick disconnect coupler. Discard preformed
packings.
29
