TM9-2330-390-14&P
4-109. HYDRAULIC LINES REPLACEMENT (Con't).
10.
Connect hose assembly (29) to straight connec-
tor (31).
11.
If removed, install new tie-down straps around
abrasion sleeve (10). Raise hose bundle and se-
cure in supported position, as noted during
removal.
Follow-on Tasks:
· Check hydraulic fluid level and fill reservoir as required (see paragraph 3-7).
· Operate lift and positioning cylinders control levers, and check operation of lift and positioning cylinders (see
paragraph 2-21).
· Check for leaks.
4-300 Change 1
