TM 9-2330-390-14&P
4-108. HYDRAULIC CONTROL VALVE REPLACEMENT (Con’t).
NOTE
• A suitable container should be used to catch any draining hydraulic fluid. Ensure that
ail spills are properly cleaned.
• Tie-down straps must be removed from hydraulic hose assembiles and electrical
cable assembly during removal. Ensure that new tie-down straps are used during
Installation.
1.
Disconnect hose assembly (5) from elbow (4) at inlet section (3).
2.
Disconnect two hose assemblies (13) from unions (14) at outlet section (16).
3.
Disconnect two hose assemblies (7) from long elbows (18) at two lift cylinder work sections (20).
4.
Disconnect two hose assemblies (6) from swivel nut elbows (8) at two lift cylinder work sections (20).
5.
Disconnect two hose assemblies (10) from swivel nut elbows (9) at positioning cylinders work section (19).
6.
Disconnect two hose assemblies (12) from swivel nut tees (11) at positioning cylinders work section (19).
4-275
