c. INSTALLATION
TM 9-2330-390-14&P
4-83. TOP AND BOTTOM BEAMS AND POSITIONING CYLINDERS REPLACEMENT
(Con't).
1.
2.
3.
4.
5.
6.
7.
If removed, install toolbox mounting brackets (front dolly) (see paragraph 4-97).
If removed, install data plates (front dolly) (see paragraph 4-105).
If removed, install detent pin lanyard assemblies (see paragraph 4-99).
If removed, install hanger brackets (front dolly) (see paragraph 4-100).
If removed, install top hooks (see paragraph 4-84).
Position bottom beam (3) at pivot axle bracket (8) and suspension links (9).
NOTE
An equal quantity of flatwashers must be installed on each side to reduce to a minimum the gap
between suspension link and bottom beam pivot area.
Grease two clevis pins (12). Install clevis pins, flatwashers (10), and new cotter pins (11).
4-226 Change 3