TM 9-2330-390-14&P
4-37.
REAR JUNCTION BOX REPAIR (Cont).
NOTE
Perform steps 1 through 5, to remove 24-volt receptacle connector and cable
assembly.
Perform steps 1 through 3 and 6, to remove 12-volt receptacle connector and cable
assembly.
3.
Remove nut (3), white ground wire (7), and green
ground wire (5) from upper right screw (4).
Remove seven screws (10) and cable assembly
wires (1) from positions 1 through 6 and 8 of termi-
nal block (9).
1.
Loosen three screws (6) and open cover (2) of
rear junction box (8).
2.
4-62