TM 9-2330-390-14&P
Table 4-1. Unit Preventive Maintenance Checks and Services (PMCS) (Con’t).
tam
No.
Interval
Location
Item To
Check/
Service
Procedure
Not Fully Mission
Capable If:
12
Semiannually Lift
Lubricate lift cylinders (see Lubrica-
Cylinders
tion Instructions, Chapter 3, Sec-
tion I).
13
Semiannually Pivot Axle
Check that lockout bracket assem-
Bracket
blies are properly and securely in-
Lockout
stalled. (see paragraph 4-82).
Brackets
14
Semiannually Hydraulic
Lines and
Fittings
DO NOT disconnect hydraulic
lines and fittings while engine is
running or before hydraulic sys-
tem pressure has been released.
When engine is running, hydraulic
system is under pressure. Dolly
set must be fully lowered to the
ground and engine must be shut
down before lines and fittings are
disconnected. A line or fitting dis-
connected under pressure will
explode with great force and
cause serious injury to personnel.
4-22
