TM 9-2330-390-14&P
Table 3-1. Operator/Crew Troubleshooting (Con’t).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. REAR DOLLY LAMPS FAIL TO LIGHT.
Step 1.
Check intradolly cable for proper connection.
Properly connect intradolly cable (see paragraph 2-11).
Step 2.
Check intradolly cable for damage.
Clean dirty connector plugs or pins with a clean rag (Item 25, Appendix F).
If intradolly cable is broken or connector plug pins are corroded or otherwise damaged,
notify Unit Maintenance.
3. ONE OR MORE LAMPS (BUT NOT ALL) FAIL TO LIGHT.
Step 1.
Check affected light(s) for dirty, loose, or disconnected connector plug(s).
Clean dirty connector plug(s) with a clean rag (Item 25, Appendix F).
Securely connect connector plug(s) at affected light(s).
Step 2.
Check Intervehicular and intradolly cables for damage.
Clean ditty connector plugs or pins with a clean rag (Item 25, Appendix F).
If cables are broken or connector plug pins are corroded or otherwise damaged, notify Unit
Maintenance.
4. DIM OR FLICKERING LAMPS.
Step 1.
Check intervehicular and intradolly cables for secure connection.
Securely connect intervehicular and intradolly cables (see paragraph 2-11).
Step 2.
Check lntervehicular and lntradolly cables for damage.
Clean dirty connector plugs or pins with a clean rag (Item 25, Appendix F).
If cables are broken or connector plug pins are corroded or otherwise damaged, notify Unit
Maintenance.
Step 3.
Check towing vehicle battery for adequate charge (see towing vehicle Operator’s Manual).
If towing vehicle battery requires charging, notify Unit Maintenance.
3-12
