TM9-2330-390-14&P
2-10.
ATTACHING FRONT AND REAR DOLLIES TO EACH OTHER (Con’t).
e.
At front dolly, push up on two lift cylinder
levers (3) and lower bottom beam (1) to within 6 in.
(15 cm) of the ground.
f.
Aline bottom beam (1) of front dolly with bottom beam of rear dolly.
g. Complete operation of removing front dolly from maneuvering position. Place top and bottom beams (2
and 1) in vertical position (see paragraph 2-21c).
h .
At rear dolly, rotate two twist locks (7) 90° and remove from bottom beam (1).
2-68
