TM 9-2330-379-14&P
HYDRAULIC PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
2
Clevis pin (2)
Tap out and discard.
3
Lever
Cotter pin (6)
Remove and discard.
assembly (4)
4
Clevis pin (5)
Tap out and discard.
5
Connecting link
Tap out connecting link pin (7) and
pin (7)
remove lever assembly (4). Discard
connecting link pin (7).
6
Air motor
V-Retainer (9)
Remove retainer (9) using flat-tip
assembly (8)
screwdriver.
7
Tee (10) and
Remove
valve (11)
8
Plate
Air motor
Remove air motor assembly (8) from plate
weldment (22)
Assembly (8)
weldment (22).
9
Air motor
Plunger (12),
Remove washer (13), spring (14), bearing
assembly (8)
washer (13),
(16), stem seal (17), modular back-up
spring (14), nut
(18), and stud (20).
(15), bearing
(16), stem seal
(17), modular
back-up (18),
and stud (20)
10
Plate
Relief fitting
Remove.
weldment
(20) and reducer
(22)
(21)
11
Plunger (23),
a.
Remove from plate weldment (22) by
wiper ring (24),
unscrewing sleeve (27).
back-up ring (25),
b.
After disassembly, discard wiper ring
O-ring (26),
(24), back-up ring (25), O-ring (26),
sleeve (27), and
and O-ring (28).
O-ring (28)
5-20
