TM 9-2330-275-14&P
2-18. DETACHING DOLLY SET FROM SHELTER (Cont).
c.
[SN J089-001 thru 159 and J017 160 thru 350 onlv).
.
NOTE
Make sure handbrakes are engaged.
(1) Disconnect power cable (2) and two air hoses
(1) from rear dolly (4) and stow on front dolly (3).
(2) Rotate bearing post (6) on each caster (5)
counterclockwise to loosen caster wheel (9) from suspension bar
(10). Remove two casters (5) from stowage by lifting bottom of
caster bracket (8) and removing pin (7).
NOTE
Steps 3 through 7arethe same
for the front and rear dollies.
(3) Install two casters (5) on dolly by placing pins
(11) in upper mounting block (12) and rotating downward into lower
mounting block (13). Insert pin (7).
2-43