TM 9-2330-275-14&P
2-18. DETACHING DOLLY SET FROM SHELTER (Con’t).
(6) Install drawbar (3) on rear dolly (9) with pin (4).
Install safety pin (5).
(7)
(8)
rear dolly (9).
(9)
from shelter (6).
(lo)
(11)
(3) to ground.
(12)
Raise drawbar(3) and install quick-release pin(l).
Remove two bolts (8) from suspension bar (7) of
Using drawbar (3) as lever, detach rear dolly (9)
Apply handbrakes (para 2-2).
1
Remove quick-release pin (1), and lower drawbar
Remove safety pin (5), pin (4), and drawbar (3)
from rear dolly (9).
(13) Install drawbar (3) on front dolly (2) with pin (4).
Install safety pin (5).
b. M832 (Except SN J089-001 thru 159 and J017-160 thru 350) and M840.
WARNING
When raising drawbar to vertical position, exercise care and control. Failure to do so
may result In damage to shelter and injury to personnel.
(1) Raise drawbar (3) and install quick-release pin (1) in drawbar.
WARNING
When removing dolly set from shelter, apply downward pressure to drawbar and
positionlng lever as bolts are removed. Failure to do so wiII allow dolly to drop to the
ground, resulting In possible injury to personnel.
(2) Remove two bolts (8) from suspension
bar (7) of front dolly (2).
(3) Using drawbar (3) as lever, detach front
dolly (2) from shelter (6).
2-41
