TM 5-1080-250-12&P 2-16Figure 2-3. Doorway Entrance/Egress 2-3. RETRIEVAL INSTRUCTIONS, MULTIPLE SCREEN CONFIGURATION.a. Normal retrieval. Retrieval of ULCANS under normal conditions consists of dismantling the screens and folding or rolling the screen modules (see Figure 2-2). (1) Camouflaged item(s) shall be removed from under the ULCANS area, support poles and shape disrupters removed, and screen system lowered. Remove all ground stakes. (2) Spread ULCANS over level ground site free of large rocks, sharp objects and debris. Separate multiple screens as required. Repair screen as necessary, if time permits. Remove leaves, twigs, dirt or other foreign matter prior to folding and stowing in carrying cases. Wipe mud/dirt from support poles and anchor stakes before stowing. Inventory system prior to stowing for storage/transport. b. Folding Instructions, ULCANS. Perform the following procedures for folding the ULCANS for transporting and/or storage. Refer to applicable steps in Figure 2-2. (1) Hexagonal Screen System. Spread the hexagonal screen on a flat surface. (a) At the center of the hexagonal screen, pick up a length (approximately 2 feet) of screen from either side and make an S-shaped fold to the center of the screen. (b) Pick up an equal length of screen from the opposite side and make an S-shaped fold on top of the first fold. (c) Continue to make S-shaped accordion folds of equal size in the same manner until the hexagonal screen is completely folded.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
