TM 10-8340-240-12&P
0006 00-4
MODULAR GENERAL PURPOSE TENT SYSTEM (MGPTS)
0006 00
PREPARATION FOR MOVEMENT
FOLD
GREEN
WHITE
FOLD
FOLD
ROLL
END SECTION
LESS THAN 5 FEET
(1), (2)
(5)
(6)
GREEN
FOLD
WHITE
STEPS
(3)
Figure 0006 00-1
c. The Mid sections (if used) are to be folded as follows. (See Figure 0006 00-2).
(1) Start with the Mid Section spread out with the green side up, as shown below.
(2) Fold Mid Section walls over Mid Section roof so that the two outer edges of the fabric
meet at the middle of the roof. Fold walls with the windows and door onto roof cloth,
up to the perimeter edge, where wall meets roof cloth.
(3) Fold the Mid Section fabric in on itself as illustrated, so that the edges meet at the
middle of the roof.
(4) Fold the edges of the Mid Section one final time, so that the width of the folded section
is less than five feet.
(5) Roll fabric as illustrated.
This section intentionally left blank
