TM 10-8340-227-13&P
TABLE 3-1. OPERATOR TROUBLESHOOTING - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. TENT UNSTABLE
Step 1.
Check frame assembly for proper setup, loose or missing hardware (1). Check that floor to frame
connectors (2) are installed in bottom of frame poles (3).
Adjust frame as necessary. Install floor to frame connectors in poles. Tighten/replace loose/missing
hardware.
Step 2.
Check that cords (4) are properly adjusted. Check that hook and loop fasteners (5) are properly
adjusted. Check for missing/loose tent pegs (6).
Adjust cords and hook and loop fasteners as necessary. Replace tent pegs as necessary.
3-2
