TM 10-8340-226-13&P
SECTION VI. UNIT MAINTENANCE PROCEDURES
WARNING
Seam sealer and solvent are extremely flammable and fumes toxic - contains
toluene and isopropyl alcohol. Do Not smoke or use seam sealer or solvent near
open flame. Death or serious injury may result from explosion or fire.
Use seam sealer and solvent in an open, well-ventilated area away from sources
of combustion; indoors wear a respirator. Avoid contact with skin and eyes. Wear
goggles and gloves when using seam sealer and solvent. Inhalation of fumes may
cause toxic sickness.
4-9. GENERAL. This section contains unit maintenance procedures applicable to the FSCT components as
authorized by the Maintenance Allocation Chart (MAC), Appendix B of this manual. Repairs will be limited to
sewing fabric rips and tears (maximum of six inches in length) or holes (maximum of two inches in diameter)
and application of seam sealer. Consult FM 10-16 for specific tentage repair guidelines.
4-10. REPAIR FRAME ASSEMBLY
This task covers: Repair
INITIAL SETUP
Tools:
Brush (Appendix B, Section III, Item 2)
Tentage Repair Kit (Appendix B, Section III, Item 1)
Materials/Parts:
Bottom Pole Sleeve (Appendix C, Fig. 2, Item 6)
Frame Pole, Long (Appendix C, Fig. 2, Item 20)
Frame Pole, Short (Appendix C, Fig. 2, Item 18)
Hub Assembly (Appendix C, Fig. 2, Item 5)
Pole & Hook Assembly (Appendix C, Fig. 2, Item 19)
Safety Spring Snap (Appendix C, Fig. 2, Item 3)
Equipment Condition:
Frame should be removed from tent to accomplish repairs.
4-3
