i.
j.
k.
l.
ARMY TM 10-8340-224-13
AIR FORCE TO 35E5-6-1
NAVY NAVFAC-P-337.A
Align holes of eave gusset (4) and side arch assembly (6)
and install quick release pin (5).
Identify purlin flap (10) on interior of window/roof
section.
Secure purlin flap (10) to frame at eave purlin (7) using
hook and pile fasteners.
Tent is now in a partially-erect stage.
NOTE
The other side of the tent will be
raised
after installation of
interior components.
2-12. COMPONENTS.
While the frame is partially-erect install
components as follows:
NOTE
Use bow knots when tying all tie
tapes to prevent tie tapes from
becoming knotted and difficult to
untie.
a.
Single Ply Floor.
CAUTION
Clear and level ground before
installing floor.
Sharp objects or
depressions can damage tent floor.
NOTE
Partially install the single ply
floor to keep the liner clean while
it is being put up.
Installation
will be completed when tent is
fully erected.
2-35