ARMY TM 10-8340-224-13
AIR FORCE TO 35E5-6-1
NAVY NAVFAC-P-337.A
p.
Place the large, fly grommet (14) on the eave extender
(12) spindle and insert hitch clip pin (15) to lock.
NOTE
Do not lace any beckets below the
eave at this time.
2-10. INSTALL GUY LINES.
a.
Identify one 19-foot guy line (1) and one tent slip (2)
for placement at each cave extender (3) base. Identify two
19-foot guy lines (1) and tent slips (2) for placement at
the two end ridge extender (4) bases.
b.
Thread the guy line (1) through one side of the tent slip
(2) and then through the brace and around the pole of the
eave (3) or ridge extender (4).
c.
Bring guy line (1) through other side of tent slip (2) and
tie an overhand knot at end of guy line (1). Repeat steps
a-c for all extenders.
d.
Identify one 19-foot guy line (1) and one tent slip (2)
for each eave extender (3) spindle.
Identify two 19-foot
guy lines (1) and tent slips (2) for the two end ridge
extender (4) spindles.
2-31
