ARMY TM 10–8340–224-13
AIR FORCE TO 35E5-6-1
NAVY NAVFAC–P–337.A
CHAPTER 3
OPERATOR MAINTENANCE INSTRUCTIONS
Subject
Section/Paragraph
Lubricating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...1
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...3-1
Lubrication Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . ...3-2
Troubleshooting Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...11
General Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...3-3
Use of Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...3-4
Operators Maintenance Procedures . . . . . . . . . . . . . . . . . . . . . . . . ...111
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...3-5
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...3-6
Repair of Light Set, Type I . . . . . . . . . . . . . . . . . . . . . . . . ...3-7
Section I. LUBRICATING INSTRUCTIONS
3-1. GENERAL. The TEMPER Tent is designed to be used in forward
areas and requires little lubrication. The slide fasteners are
the only components of the tent which require lubrication. There
is’ no separate Lubrication Order for the TEMPER, therefore all
lubrication instructions contained herein are mandatory and to be
adhered to as specified. Lubrication materials are listed in
Appendix E.
3–2. LUBRICATION PROCEDURES. Ensure slide fasteners are free from
dirt and debris. Lubricate the slide fasteners by applying stick
lubricant to metal or plastic slide fasteners when they become
difficult to operate. Operate slide fastener to ensure overall
lubrication.
SECTION II. OPERATOR TROUBLESHOOTING PROCEDURES
3-3. GENERAL INSTRUCTIONS. Table 3-1 contains troubleshooting
instructions designed to aid in diagnosing unsatisfactory
operation or failure of TEMPER components. The table lists common
malfunctions that you may find during normal use or maintenance
of the equipment. This manual cannot list all malfunctions that
may occur, nor all tests and inspections and corrective actions.
If a malfunction is not listed or is not corrected by the
prescribed action, notify unit maintenance.
3-1
