ARMY TM 10-8340-211-13
AIR FORCE TO 35E5-1-101
3-4. Troubleshooting. In table 3-1, each malfunction listed is followed by inspections which will help you to determine
probable causes and corrective actions to take. You should perform the inspections and corrective actions in the order
listed.
Table 3-1. Operator Troubleshooting.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
SLIDE FASTENER HARD TO OPERATE.
Step 1. Check for dirt in scoops.
Clean by using a soft bristle brush, then lubricate (para. 3-2).
Step 2. Check for dry or slightly corroded fastener.
Clean with soft bristle brush, then lubricate (para. 3-2).
Step 3. Check for crushed slider.
Report to unit maintenance.
2.
RIDGE PLATE (OR RIDGE POLE) DOES NOT FIT SQUARELY ON UPRIGHT.
Check for bent or missing spindle.
Straighten spindle or replace upright pole.
3.
LINER TOO CLOSE TO TENT BODY ROOF.
Step 1. On small tent, check adjustment of straps in peak.
Adjust.
Step 2. On large and medium tents, check tension of suspension lines at ridge and eaves.
Adjust.
4.
EAVE AND CORNER GROMMETS RIPPING OUT WITH REGULARITY
Step 1. Check for old and worn fabric.
Replace tent.
Step 2. Check tension of lines in wet weather.
Loosen at tent slips more frequently.
3-2
