TM 10-7360-209-13&P
CHAPTER 5
DIRECT SUPPORT MAINTENANCE INSTRUCTIONS
Section I. GENERAL
5-1.
SCOPE OF DIRECT SUPPORT MAINTENANCE.
Direct support maintenance identified
in appendix B consists of repairing or replacing components that are riveted or
welded.
Refer to TM 9-450 for information on metal body repairs. Direct support
maintenance of the M2 Burner Unit is covered in TM 10-7360-204-13&P.
Section II.
DIRECT SUPPORT MAINTENANCE PROCEDURES
5-2.
RIVET REMOVAL.
Remove rivets as shown below:
When removing rivets, do not increase the size of the
original rivet hole so that the original rivet requires
replacement with a larger rivet.
5-1
