DOOR ASSEMBLY RFI/EMI GASKET

DOOR ASSEMBLY RFI/EMI GASKET - continued - TM-10-5411-224-14_94

TM-10-5411-224-14 Lightweight Multipurpose Shelters (LMS) Model No. S-78B/G Type I and Type III & 5411-01-357-3683 Manual
Page Navigation
84

TM 10-5411-224-14 5-15. DOOR ASSEMBLY RFI/EMI GASKET. This task covers: a. Removal b. Installation INITIAL SETUP Tools: General Mechanics Tool Kit (Item 1, Appendix B) Riveting Tool (Item 3, Appendix B) Safety Glasses (Item 8, Appendix B) Materials/Parts: Alcohol, Isopropyl (Item 7, Appendix E) Cloth, cotton (Item 3, Appendix E) Gloves, rubber (Item 11, Appendix E) RFI/EMI Gasket (Appendix F, Figure F-2) Rivets (Item 31, Appendix E) Strap Strap REMOVAL WARNING Drilling creates metal chips which may enter eyes and cause serious injury. Eye protection is required. 1. Drill out 58 rivets (1) securing metal straps (2), (3), (4) and (5) and EMI/RFI gasket (6) in track around door perimeter. 2. Remove metal straps (2), (3), (4) and (5) and RFI/EMI gasket (6) from door. WARNING Alcohol solvents are flammable. Keep away from heat, sparks, and open flame. Keep containers closed when not in use. Use only in well ventilated areas. Avoid prolonged breathing of vapors or repeated contact with skin. 3. Using a clean cloth and alcohol, clean dirt and residue out of track. 5-36

Privacy Statement
Press Release
Contact