TM 10-5411-207-24P
O -
Reparable item. When not economically reparable, condemn and dispose of the item at
organizational or aviation unit level
F - Reparable item. When uneconomically reparable, condemn and dispose of the item at the direct
support or aviation intermediate level
H - Reparable item.
support level.
D - Reparable item.
disposal of item
L - Reparable item,
(SRA).
When uneconomically reparable, condemn and dispose of the item at the general
When beyond lower level repair capability, return to depot. Condemnation and
not authorized below depot level.
Condemnation and disposal not authorized below specialized repair activity
A - Item requires special handling or condemnation procedures because of specific reasons (e.g.,
precious metal content, high dollar value, critical material, or hazardous material). Refer to
appropriate manuals/directives for specific instructions.
c.
CAGEC (Column (3)). The Commercial and Government Entity Code (CAGEC) is a 5-digit
numeric code which is used to identify the manufacturer, distributor, or Government agency, etc., that supplies
the item.
d. PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer,
(individual, company, firm, corporation, or Government activity), which controls the design and characteristics
of the item by means of its engineering drawings, specifications standards, and inspection requirements to
identify an item or range of items.
NOTE
When you use an NSN to requisition an item, the item you receive may have a
different part number from the part ordered.
e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5). This column includes the
following information:
(1) The Federal item name and, when required, a minimum description to identify the item.
(2) The physical security classification of the item is indicated by the parenthetical entry, e.g.,
PhySec C1 - Confidential, Phy Sec C1 (S) - Secret, Phy Sec C1 (T) - Top Secret.
(3) Items that are included in kits and sets are listed below the name of the kit or set.
(4) Spare/repair parts that make up an assembled item are listed immediately following the
assembled item line entry.
(5) Part numbers for bulk materials are referenced in this column in the line item entry for the
item to be manufactured/fabricated.
(6) When the item is not used with all serial numbers of the same model, the effective serial
numbers are shown on the last line(s) of the description (before UOC).
(7) The usable on code, when applicable (see paragraph 5, Special Information).
(8) In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry
for each special tool, special TMDE, and other special support equipment. When density of equipments
4
