Figure 3-31.
TM 10-5411-205-13
3-29.
Data Plates.
This task covers:
Repair
INITIAL SETUP
Tools
Materials/Parts
General Mechanic’s Automotive Tool Kit
Sealer (Item 28, Appendix D)
Blind Riveter
Repair. (Figure 3-31) Repair of the data plates consists of replacement of the missing,
damaged, or defective parts, as necessary, according to the following procedure:
(1)
(2)
(3)
(4)
Remove four rivnuts (1) attaching the aicraft loading data date (2) to louver
cover assembly panel (3). (Refer to paragraph 3-9.b for rivnut removal instruc-
tions.)
Place the aircraft loading data plate (2) in place and secure to door with four
rivnuts (1). (Refer to paragraph 3-9.b for rivnut installation instructions. )
The following procedures are
this shelter.
Remove four blind rivets (4)
panel (3) and remove plate.
tions.)
NOTE
similar for all other data plates in
securing data plate (5) to louver cover assembly
(Refer to paragraph 3-9.a. for rivet removal instruc-
Place data date (5) in place on door and secure with four blind rivets (4).
(Refer to paragraph 3-9.a. for rivet installation instructions.)
3-58
