TM 10-5411-203-13
4-24.
RIVET RIPS REPAIR INSTRUCTIONS (CONT)
WARNING
Wear safety glasses while drilling out rivets. Failure to do so could result in serious eye
injury or blindness.
1.
Drill out all pop rivets that secure retainer strip (1) and connector assembly (2) to frame assembly (3)
2.
Remove retainer strip (1).
3.
Remove any remaining pop rivet fragments.
4.
Hold ripped connector assembly (2) against frame assembly (3). Using marking chalk, mark X-spots (4) where
holes are to be drilled. Mark X-spots (4) about halfway between rips (5) or between rips (5) and original rivet (6).
4-36