LOCATION AND DESCRIPTION OF MAJOR COMPONENTS (CONT)

LOCATION AND DESCRIPTION OF MAJOR COMPONENTS (cont) - TM-10-5410-230-13_9

LOCATION AND DESCRIPTION OF MAJOR COMPONENTS (CONT) - TM-10-5410-230-13_11

TM-10-5410-230-13 Standard Integrated Command Post Systems Bootwalls Types I II & IV Classes 1 (Green) and 2 (Tan) Manual
Page Navigation
4

TM 10-5410-230-13 1-8. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS (CONT). b. Type II. The RWS Boot Wall (1) is constructed of mildew and flame resistant polyester duck and is 11 feet wide, 8 feet high and 5 feet deep. It is interchangeable with any other wall assembly of the MCPS tent. Quick release fasteners (2) and hook and pile fastener tapes (3) connect the Boot Wall end panel (4) to the MCPS tent roof cap and adjacent walls. The end panel assembly is fitted with a rollup fabric door (5). An adjustable belly band (6) wraps around the RWS to secure the Boot Wall in place. A rigid U-shaped frame (7) attaches to the rear of the RWS to support the Boot Wall fabric. Antenna sleeves (8) are provided on the Boot Wall roof. Three foot loops (9) on each side provide a means of staking the Boot Wall to the ground. 1-4

Privacy Statement
Press Release
Contact