TM 10-5410-223-14/1
C1
(21) and channels (22).
b. Disassembly.
(8) Remove screws (29, fig. 6-2, sheet 2 of 2)
(1) Remove bolts (1, fig. 6-2, sheet 1 of 2) and
and rivets (24) and remove the half hinge (25) and
washers (2) and remove the handles (9).
(2) Remove screws (4) and washers (6) and
closeout (26).
remove the strikes (6).
(9) Remove rivets (27 and 28) and remove the
bracket assemblies (29).
(3) Remove rivets (7 and 8) and remove ex-
trusion (9) and spacers (10 and 11).
(10 remove rivets (30 and 31) and remove the
(4) Remove rivets (12) and remove castings
bracket assemblies (32).
(13).
(11) Remove snap fasteners (33) and nuts (34).
(12) Remove bolts (35) and washers (36) and
(5) Remove rivets (14) and remove plates (15)
and seal (16).
remove the angles (37).
(6) Remove bolts (17) and washers (18) and
{13) Remove all inserts (38), if damaged.
remove the brackets (19).
(14) Remove deep draw cans (39), if damaged,
(7) Remove rivets (20) and remove extrusions
from the raw panel(42).
(15) On shelter serial No. 630 thru 727 only.
Remove screws (40) and remove safety hasp (41).
Change 1, 6-3
