TM 10-5410-223-14/1
C1
12. INSERT LOWER END OF SUPPORT ASSEMBLY INTO THE DEEP DRAW CAN OF THE
FOLDING FLOOR. DEPRESS THE HANDLE ON THE UPPER END OF SUPPORT
ASSEMBLY. PUSH SUPPORT ASSEMBLY INTO PLACE AND RELEASE THE HANDLE
FORCING THE PLUG AT THE UPPER END INTO THE DEEP DRAW CAN OF THE
FOLDING ROOF.
NOTE: IF SUPPORT ASSEMBLY CANNOT BE INSTALLED ADJUST THE FOLDING
FLOOR SUPPORT CABLE. FOLLOW THE SAME PROCEDURE WHEN IN-
STALLING THE OTHER SUPPORT ASSEMBLY.
T S 016722
Figure 4-1. Erection of shelter, multipurpose (sheet 12 of 13).
Change 1, 4-11
