of these equipment' can be accomplished by
s
locate the illustration figure and item number noted on
converting the equipment quantity to a decimal factor by
the illustration.
placing a decimal point before the next to last digit of
b. When Federal Stock Number or Reference
the number to indicate hundredths, and multiplying the
Number is Known.
decimal factor by the parts quantity authorized in the 51-
(1) First. Using the Index of Federal stock
100 allowance column. Example, authorized allowance
numbers and reference numbers find the pertinent
for 51-100 equipment' is 40; for 150 equipment'
s
s
Federal stock number or reference number. This index
multiply 40 by 1.50 or 60 parts required.
is in ascending FSN sequence followed by a list of
h. One-Year Allowances Per 100 Equipment' /
s
reference numbers in alpha-numeric sequence, cross-
Contingency Planning Purposes. This column indicates
referenced to the illustration figure number and item
opposite the first appearance of each item the total
number.
quantity
required
for
distribution
and
(2) Second. Using the repair part listing, find
contingency'/planning purposes. The range of items
the assemble
group of the repair part and the
indicates total quantities of all authorized items required
illustration figure number and item number referenced
to provide for adequate support of 100 equipment' for
s
in the Index of Federal stock numbers and reference
one year.
numbers.
i. Illustration.
(1) Figure member.
Indicates the figure
6. Abbreviations
number of the illustration in which the item is shown.
Ay ............................................................. Assembly
dia .............................................................diameter
(2) Item number.
Indicates the callout
LH...............................................................left hand
number used to reference the item in the illustration.
mtg ............................................................ mounting
RH ............................................................right hand
4. Special Information
thd ................................................................. thread
thk .................................................................... thick
a. Repair parts mortality has been based on 8,760
w/....................................................................... with
hours operation per year.
w/o ................................................................ without
b. Parts which require manufacture or assembly at
a category higher than that authorized for installation
7. Federal supply codes for manufacturers
swill indicate in the source column the higher category.
Codes
Manufacture
c. Action change codes indicated in the left and
margin of the listing page denote the following:
00000
Ordnance Corps
N--Indicates an added item not included in
00779
Amp, Inc.
previous publications.
03481
Goodrich, B.F. Co. Aviation Products
C-Indicates a change in data.
Div.
F-Indicates a change in FSN only.
04618
A American Pancor, Inc.
d. The
following publication pertains to
07707
United Shoe Machinery Corp. Fastener
expandable shelter and its components:
Div.
TM 10-5410-221-24 Organizational, Direct
08805
General Electric Co. Large Lamp Dept.
and General Support
08807
General Electric Co. Photo Lamp Dept.
Maintenance Manual
09094
Waldlick Aero-Space Devices, Inc.
09284
Task, Corp
5. How to Locate Repair Parts
09922
Burndy Corp.
14007
Cabot Piping System, Plastics Div of
a. When Federal Stock Number or Reference
Cabot Corp.
Number is Unknown.
14557
Stanley Hardware Div. of Stanley Works
15210
Sherwin-Williams Co.
(1) First.
Using the table of contents
17023
Bruce Industries, Inc.
determine the assembly group within which the repair
17325
Custom Materials Inc.
part belongs. This is necessary since illustrations are
18702
Ducommun Metals and Supply Co.
prepared for assembly groups, and listings are divided
19220
Eberhard Mfg. Co.
into the same groups.
19704
Aer-Bea Co.
19920
Dietzgen, Eugene Co.
(2) Second. Find the illustration covering the
22656
Wiltonics
assembly group to which the repair part belongs.
24446
General Electric
(3) Third. Identify the repair part on the
25472
Goodrich, B. F. Co.
26533
-Zero Mfg. Co. Shelter Div.
illustration and note the illustration figure and item
28421
Current Control Devices
number of the repair part.
65586
Wiegand, Edwin L
Co.
(4) Fourth. Using the repair parts listing, find
70167
Air Cruisers Div. of Garret Corp.
the assembly group to which the repair part belongs and
71183
Bryant Electric Co.
v
