TM 10-5410-221-14/1
TS013772
Figure 4-25. Rivet Inspection (TS 013772)
(6) Trim the broken stem flush with the rivet head.
(2) The configurations of installed rivets with the
(7) Firmly press on the installed rivet to assure
blind side visible shall be similar to those shown in figure
tightness.
4-25.
d. Inspection of Installed Rivets. Installed rivets
(3) Superficial stretch marks which may appear on
shall be inspected as follows:
the rivet are not detrimental to rivet strength and are
(1) The rivet stem and collar shall be flush within the
acceptable.
limits
described
in
4-25.
(4) After stem trimming, stem can be checked for
tightness by applying a force of approximately
4-89
