Figure 4-6. Vehicle Identification Plate Re-Attachment

M1070 HET ARMOR KIT

II113400

Rev. D

14. Install windshield wiper arms (retained from Teardown, Chapter 2) per TM 9-2320-360-20-2.

15. Install beacon light assembly (retained from Teardown, Chapter 2) per TM 9-2320-360-20-2.

16. Install work lights (retained from Teardown, Chapter 2) onto rear of cab per TM 9-2320-360-20-2.

17. Install the vehicle identification plate (P/N 1805190) (Retained from Teardown, Chapter 2) onto dash panel

near glove-box as shown in Figure 4-6. Attach using four #10 x 0.500 inch Phillips Pan-head Self-Tapping

screws (1).

Figure 4-6. Vehicle Identification Plate Re-Attachment.

APRIL 2005

Privacy Statement
Press Release
Contact