M1070 HET ARMOR KIT
II113400
Rev. D
These Installation Instructions provide the illustration directly after the text and will be on either the same page
or the facing page, where practical.
Before beginning the assembly of a part, remove all corrosion-preventative compound (if any) as well as any
accumulated foreign matter.
Selected screws and bolts require Loctite 242 during installation. These screws and bolts are identified in the
installation instructions. Generally, if no locking fastener (i.e., locknut, lockwasher) is utilized, Loctite 242 is
required.
All fastener torques are specified within the specific instructions for each component.
The installation skill level required to complete the installation of the Kit shall be MOS 63S, Heavy Wheeled
Vehicle Mechanic.
JUNE 2005
