TB 9-2320-360-13&P-2
RIGHT CAB SIDE (REAR) ARMOR REPLACEMENT - CONTINUED
0028 00
REMOVAL - CONTINUED
31 32
30
33
44
34
29
35,36
43
37
38,39
24
42
417-107
40,41
CLEANING AND INSPECTION
INSTALLATION
NOTE
Thicker panel is on the outside of the thinner panel.
1.
Position cab side (rear) armor (24) on outside of inner cab side armor (43) and align bolt holes.
2.
Install two stud brackets (42), six washers (41), and new locknuts (40) on cab side (rear) armor (24 and 43).
3.
Install eight washers (32), bolts (31), washers (33), and new locknuts (34). Tighten locknuts to 35 lb-ft (48 Nm).
4.
Install two bolts (30), lifting eyes (29), washers (36), and new locknuts (35). Tighten locknuts to 35 lb-ft (48 Nm).
5.
Install bracket (37), eight bolts (44), washers (39), and new locknuts (38). Tighten locknuts to 35 lb-ft (48 Nm).
6.
Install 24 washers (26) on studs along right side of roof armor.
0028 00-5
