TB 9-2320-360-13&P-2
WHEEL WELL ARMOR REPLACEMENT - CONTINUED
0020 00
REMOVAL
1.
Lower center blast deflector as needed to gain access to two locknuts (9) (WP 0032 00).
2.
Remove two bolts (4), washers (3), spacers (2), washers (8), and locknuts (9) from upper wheel well armor (1). Discard
locknuts.
3.
Remove three locknuts (6), washers (5), and upper wheel well armor (1) from vehicle. Discard locknuts.
4.
Remove three locknuts (10), washers (11), and stud plate (7) from upper wheel well armor (1). Discard locknuts.
4
3
2
5
1
6
10,11
417-096
7
8
9
0020 00-2
