Rear Wall Mounting Plate (M915-A2 and M916-A1)

Installation Manual P/N 0257550622-00

Freightliner M915 / M916 -

(Doc No.: II113500-1 D)

Crew Protection Kit

7.7 Rear Wall Mounting Plate (M915-A2 and M916-A1)

This step should be performed after Step 5-11 and prior to Step 5-17 in the main installation sequence.

7.7.1 Parts, Fasteners, Special Tools, and Materials

Parts (see Figure 7-12):

Alternate

Find No. in

Part No.

Description

Procedure

Quantity

113507-1

Plate, Mounting

#507

Fasteners: (see Figure 7-12)

Find No.

(Table 3-5) Description

Size

Quantity

Bolt

5/16" x 1-1/4"

Screw, self tapping

#10

Special Tools:

Description

Vendor/Part-Number

No 21 drill bit (0.159" Diameter)

8.7.2 Installation Instructions

1. Remove the six bolts indicated in Figure 7-12 and install part #507 using new bolts (4) and

existing washers. Apply thread-locking compound to the screws.

2. Original Equipment Manufacturer (OEM) components that were displaced from the rear

wall may now be mounted to this plate. Simply transfer the mounting hole pattern for

each component to the plate and drill a 0.159" (No. 21) hole for each mark. Secure the

component with #10 x " self tapping screws (58).