Installation Manual P/N 0257550622-00
Freightliner M915 / M916 -
(Doc No.: II113500-1 D)
Crew Protection Kit
Perform this step prior to Step 5.2 in the main installation sequence.
7.2.1 Parts, Fasteners, Special Tools, and Materials
Alternate
Find No. in
Part No.
Part No.
Description
Procedure
Quantity
0257140642-00
113512-1
SPACER, HOOD
#642
2
Find No.
Description
Size
Quantity
52
Bolt
1/2" x 3-1/2"
2
34
Flat Washer
1/2"
4
63
Self-Locking Nut, NC
1/2"
2
Special Tools:
Description
Vendor/Part-Number
None
7.2.2 Installation Instructions
1) Remove the bolt that attaches each hood hinge to the front cross member. Using an
appropriate lifting device, lift the hood and insert one spacer, P/N 113512-1, under each
hinge. Re-attach using 1/2" x 3-1/2" bolts, 1/2" flat washers, and 1/2" locknuts. Torque to
122 Nm (90 lb-ft) (See Figure 7-5).
IMPORTANT
The hinges have slotted holes to adjust the hood forward or rearward. Install the hood
initially in its forward-most position and then re-adjust to allow for best fit and
engagement with the hood clamps after the entire kit has been installed.
