TB 9-2320-302-13&P-1
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
Location
Item To
Item
Check/
Not Fully Mission
No.
Interval
Service
Procedure
Capable If:
7
Before
Floor /Fire-
a. Inspect right side floor and firewall Any panel or armor plate is damaged,
wall Armor
armor panels for damage or loose or bent out of shape, misaligned, loose or
(Right Side)
missing mounting hardware.
missing, or mounting bolts are loose or
missing.
b. Inspect right side floor and firewall Any corrosion where area is unsound
armor panels for areas of rust or cor- and small pin holes are present, or a
rosion.
rusted through condition is present.
c. Inspect right side floor and firewall Any cracks that are longer than 1" or
armor panels for cracks near or elon- two consecutive bolt holes that are elon-
gation of bolt holes.
gated.
d. Inspect right side floor and firewall Any complete penetration of the armor
armor panels for any holes or gouges. (hole in the armor) or multiple gouges
1/4" or deeper within 3" of each other.
FIREWALL ARMOR
FLOOR ARMOR
417-257
Any cracks, breaks, or loose hardware
8
Weekly
Front Sus-
Inspect front suspension springs and
or damage to suspension springs is
pension
mounting hardware for cracks, breaks,
noted.
or loose or missing hardware and/or
shackles. Notify your supervisor of any
damage found.
Inspect cab mounts for evidence of dete- Deterioration, over compression, or
9
Weekly
Cab Mounts
loose mounting hardware is noted.
rioration, over compression or loose
mounting hardware. Notify your super-
visor of any damage or looseness found.
0009 00-12
