TB 9-2320-302-13&P-1
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
Location
Item To
Item
Check/
Not Fully Mission
No.
Interval
Service
Procedure
Capable If:
REAR AND
RIGHT
SIDE
5
Before
Rear Cab
a. Inspect rear cab armor panels for Any panel or armor plate is damaged,
Armor
damage or loose or missing mounting bent out of shape, misaligned, loose or
hardware.
missing, or mounting bolts are loose or
missing.
b. Inspect rear cab armor panels for Any corrosion where area is unsound
areas of rust or corrosion.
and small pin holes are present, or a
rusted through condition is present.
c. Inspect rear cab armor panels for Any cracks that are longer than 1" or
cracks near or elongation of bolt two consecutive bolt holes that are elon-
gated.
holes.
d. Inspect rear cab armor panels for any Any complete penetration of the armor
holes or gouges.
(hole in the armor) or multiple gouges
1/4" or deeper within 3" of each other.
e. Inspect escape hatch ballistic glass Any ballistic glass mounting hardware
mounting hardware for damage, is damaged, loose, or missing, or
loose, or missing mounting hardware. mounting bolts are loose or missing.
Rock chips, cracks with spider webbing,
f. Inspect interior surface of escape
scratches, pitting, or hits in the exterior
hatch ballistic glass for rock chips,
layer of ballistic glass that expose glass
cracks, scratches, pitting, any hits that
below the first layer, cloudiness that
expose glass below the first layer,
impairs vision.
cloudiness, or any stickers that impair
vision.
Rock chips, cracks with spider webbing,
g. Exit vehicle and inspect exterior sur-
scratches, pitting, or hits in the exterior
face of escape hatch ballistic glass for
layer of ballistic glass that expose glass
rock chips, cracks, scratches, pitting,
below the first layer, cloudiness that
any hits that expose glass below the
impairs vision.
first layer, cloudiness, or any stickers
that impair vision.
0009 00-8