TM 9-2330-390-14&P
4-65. AIRBRAKE VALVE REPLACEMENT (Cont).
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame or
excessive heat. The solvents flash point is 100°F-1380F (38°C-590C). If you
become dizzy while using cleaning solvent, immediately get fresh air and medical help.
if solvent contacts eyes, immediately wash your eyes and seek medical attention.
Clean sealing compound from threads of control knob and stem with dry cleaning solvent and dry with a clean
rag.
1.
If working on rear doily, install three elbows (7) on airbrake valve (2).
NOTE
Male threads of fittings should be coated with antiseize tape if not already
factory-coated with an antiseize compound.
REAR DOLLY
4-150