TM 9-2330-390-14&P
4-63. FRONT DOLLY BOOSTER RELAY VALVE REPLACEMENT (Con't).
3.
Remove booster relay valve (2) from reducer (4).
4.
If damaged, remove reducer (4) from tee (6).
5.
Remove two plugs (3) and elbow (7) from booster relay valve (2).
NOTE
Male threads of fittings should be coated with antiseize tape if not already
factory-coated with an antiseize compound.
1.
Install elbow (7) and two plugs (3) on booster relay valve (2).
2.
If removed, install reducer (4) on tee (6).
3.
Install booster relay valve (2) on reducer (4).
4.
Connect tube assembly (1) to booster relay valve (2).
5.
Connect intervehicular air hose (5) to elbow (7).
Follow-on Tasks:
l Close air reservoir draincock (see paragraph 3-6).
l Connect intervehicular air hoses (see paragraph 2-11).
l Check for leaks (see paragraph 4-23).
4-145