TM 10-5411-200-14
T.O. 35E4-177-1
4-25.
(cont)
8.
Install washers (12), lockwashers (11), and bolts (10) securing
fixed endwall (13) to fixed roof and floor.
9.
Install washers (8), lockwashers (7), and screws (6) securing
reinforcement angles (9) to fixed endwall.
10.
Install washers (3), lockwashers (2) and screws (1) securing endwall
hinge (4) to fixed endwall (5) and corner post.
11.
Install hinged endwalls in accordance with paragraph 4-21.
12.
Install area light assembly.
(Refer to paragraph 3-4)
13.
Install door activated blackout switch and associated wiring.
(Refer to paragraph 4-15)
14.
Install power entry panel.
(Refer to paragraph 5-3)
15.
Connect services entry power and set main circuit breaker to ON
position.
4-26.
CARGO DOOR END ENDWALL PANEL REPLACEMENT AND REPAIR
This task covers:
a. Removal
d.
Repair
b.
Disassembly
e. Assembly
c. Cleaning, Inspection
f.
Installation
INITIAL SETUP
Special Tools
Materials
Hand blind riveter, Appendix B, Item 2
Adhesive, Item 2, Appendix E
Standard Tools
Personnel - 4
General mechanics tool kit
4-127
