TM 9-4931-374-13&P
CONVERSION TABLE
IN.
CM
NOTES
4.00 + 0.06
10.16 + 0.15
1. All dimensions shown are in inches. A dimension with a two-digit
0.50
1.27
decimal has a tolerance of +0.01 (+0.025 cm) and a three-digit
0.19
0.48
decimal has a tolerance of +0.005 (+0.012 cm).
0.41
1.04
1.00
2.54
2. Fabricate from metal sheet, aluminum, NSN 9535-00-232-7599.
0.375
0.953
20.00 + 0.06
50.80 + 0.15
3. Break all sharp edges and deburr all holes.
1.12 + 0.06
2.84 + 0.15
2.94
7.47
WARNING
13.50
34.29
Use only type 1.1.1 trichloroethane solvent. Never use
3.25
8.26
solvent unless ventilation is provided. Breathing solvent
10.00
25.40
vapors will cause unconsciousness, prolonged skin contact
8.75
22.22
with solvent will cause irritation, and taking solvent
4.37
11.10
internally will cause vomiting.
0.63
1.60
0.281
0.714
4. Degrease with type 1.1.1 trichloroethane (item 20, app D).
7.00
17.78
5. Apply one coat zinc chromate primer coating (item 16, app D),
followed by two coats semigloss OD enamel (item 8, app D).
6. Mark with black stencil marking ink (item 13, app D) as follows.
P/N 11020138
E-59
