TM 9-4931-374-13&P
CONVERSION TABLE
IN.
CM
NOTES
3.69
9.37
1. All dimensions shown are in inches. A dimension with a two-digit
21.12
53.64
decimal has a tolerance of +0.02 in. (+0.05 cm) and a three-digit
32.62
82.85
decimal has a tolerance of +0.005 in. (+0.013 cm).
30.50
77.47
1.06
2.69
2. Fabricate from steel structural angle, NSN 9520-00-277-4912.
28.50
72.39
32.50
82.55
3. Break all sharp edges and deburr all holes.
34.50
87.63
0.50
1.27
WARNING
0.203
0.52
Use only type 1.1.1 trichloroethane solvent. Never use
4.00
10.16
solvent unless ventilation is provided. Breathing solvent
2.13
5.41
vapors will cause unconsciousness, prolonged skin contact
2.00
5.08
with solvent will cause irritation, and taking solvent
0.188
0.48
internally will cause vomiting.
0.390
0.99
4. Degrease with type 1.1.1 trichloroethane (item 20, app D).
5. Apply one coat primer coating (item 15, app D), followed by two coats semigloss OD enamel
(item 8, app D).
E-49
