TM 9-4931-374-13&P
CONVERSION TABLE
IN.
CM
NOTES
1.00
2.54
1
All dimensions shown are in inches. A dim ension with a two-digit
0.413
1.049
decimal has a tolerance of 0.06 (0.15 cm) and a three-digit
10.500
26.67
decimal has a tolerance of 0.010 (0.025 cm).
14.00
35.56
1.75
4.45
2.
Fabricate from steel metal strip, NSN 9515-00-066-1015.
0.190
0.483
0.50
1.27
3.
Break all sharp edges and deburr all holes.
WARNING
Use only type 1.1.1 trichloroethane solvent. Never use solvent
unless ventilation is provided. Breathing solvent vapors will
cause unconsciousness, prolonged skin contact with solvent
will cause irritation, and taking solvent internally will cause
vomiting.
4.
Degrease with trichloroethane, type 1.1.1 (item 20, app D).
5.
Apply one coat primer coating (item 15, app D), followed by two coats
semigloss OD enamel (item 8, app D).
6.
Mark part number with black stencil marking ink (item 13, app D).
E-27
