TM 9-4931-374-13&P
CONVERSION TABLE
IN.
CM
NOTES
2.000
5.080
1.
All dimensions shown are in inches. A dimension with a two-digit
4.50+0.10
11.433+0.25
decimal has a tolerance of 0.13 in. (0.33 cm) and a three-digit
decimal has a tolerance of 0.060 in. (0.152 cm). All angles have
46.00
116.84
0.922
2.341
a tolerance of +5 degrees.
0.60
1.52
54.00
137.16
2.
Fabricate from rigid metal conduit, NSN 5975-00-178-1217.
30.38
77.17
0.75
1.91
3.
Ream ends to remove rough edge and break all sharp edges.
WARNING
Use only type 1.1.1 trichloroethane solvent. Never use solvent
unless ventilation is provided. Breathing solvent vapors will
cause unconsciousness, prolonged skin contact with solvent
will cause irritation, and taking solvent internally will cause
vomiting.
4.
Degrease with type 1.1.1 trichloroethane (item 20, app D).
5.
Apply one coat primer coating (item 15, app D), followed by two
coats white lacquer (item 11, app D).
6.
Do not apply primer or lacquer within 0.60 in. (1.52 cm) of either
end.
E-11
